Sightcorp logo
29
NOV
2018

how to use threads?

Toolkit uses threads to carry out analysis of features such as age and gender in parallel. The number depends on the number of faces to be analysed and the number of cores in your machine. If you are planning to analyse multiple people at once, we advise setting the threads to 1...
29
NOV
2018

what is the data consumption for CrowdStats?

The consumption depends on the number of people detected per second, but it varies between 500bytes to 1 kilobyte per second.
29
NOV
2018

what is the required storage for the CSV file?

The size strongly depends on the number of people analyzed since the Toolkit dumps raw data without aggregation. S single file for the Toolkit processing a video of a full crowd for 30 seconds generates around 30kb of data (excluding landmarks). Interpolating the above to a full...
29
NOV
2018

how to connect the Toolkit to CrowdStats?

First you need to register an account on the website of CrowdStats. Once your account is approved, you can login and add your first project. In the top left corner of your CrowdStats dashboard, you can see your Application Key. Copy this key and enter in the Output tab of the...
29
NOV
2018

How to start the Toolkit automatically?

The Toolkit can be started from the exe file normally. The start.bat file is generally used to start the Toolkit at system bootup in background with the specified parameters (please refer to our Toolkit documentation for more information on auto-restart). Adding the "--nohide"...
29
NOV
2018

How to increase performance/speed of Toolkit?

The best way to achieve high performance with the Toolkit is to run the software on a powerful processor (e.g. i5 or i7). The software is running sophisticated computer vision algorithms, therefore, it requires certain levels of computing power. If upgrading your hardware is not...
29
NOV
2018

how to connect an IP camera to Toolkit?

In order to connect an IP camera to the Toolkit, you have to setup an URL for IP camera. This URL is defined as: <protocol>://<username>:<password>@<ip_address>/<data_format> For example: rtsp://john:pAssw0rd@192.168.1.200/mpeg4/media.amp or...
29
NOV
2018

can Toolkit analyse a pre-recorded video?

Yes, you can analyse videos from your PC with the Toolkit. Go to Input tab and select the video file you want to use under the Video File option. You can check the Loop video checkbox if you want it to keep rolling. Double check if Show Visualisation checkbox is checked (by...
12